Jumaat, 11 Mac 2011

MUSC DRAG CHALLENGE CYBERJAYA

ha ha ni dia kegemaran aku selama ni "street legal race"...dah lama aku nak tulis artikel pasal ni tapi asyik lupe je...MUSC Drag Challenge pasti tidak asing lagi bagi "kaki-kaki" sukan permotoran di malaysia baik yang motor atau yang kereta.Pertandingan ni berlansung di Persiaran Selatan Cyberjaya.Aku rajin gak pergi usha-usha kat sane tengok mesin-mesin power hehehe...ok,kat sini aku serta kan sedikit gambar dan jadual pertandingan ni...



ape lagi,jom lagi pergi?ni bukan lumba haram la...polis pun ade tengok gak kadang-kadang....tengok teknologi budak-budak malaysia ni da makin maju...





Rabu, 2 Mac 2011



The New Proton Satria Neo maybe one of your choice of car to buy. Before you decide

to buy it, it is better to read some info and reviews about this hatcback sports car from Proton. Maybe now you are comparing between Satria Neo VS Perodua Myvi VS GEN2 VS SAGA BLM etc. Bear in mind, stick to what you choose, the design, performance or comfort. B

ut clearly this car fits all of the above characteristic. Except that it is actually small inside but look big outside due to the “wide body kit” styling at the wheel arc and bumpers. Many of the user of Satria Neo are complaining about the fuel comsumption because it uses the first generation of campro engine. But then, it also has a very attractive factors which is the sporty design.


The Proton Satria Neo was introduced in June 2006 as a replacement for the first generation Satria. Based

on a new platform developed in-house by Proton (with some parts borrowed from the bigger Gen-2 and W

aja), the car is currently only available in a three-door hatchback guise. The car was developed at a cost of RM500 million and four years, and was expected by Proton to generate a monthly sales volume of 2,000 to 2,500 units. The car was also intended to target those who are “youthful and sporty”. The Satria Neo was launched by Malaysian Prime Minister Abdullah Ahmad Badawi.




FULL SPECIFICATION PROTON SATRIA NEO


The entry-level Satria Neo, the 1.3 L-line, is powered by a 1.3 litre, inline-4 twin-cam Campro engine, producing 94 bhp (70 kW) at 6000 rpm and 120 N m of torque at 4000 rpm. The 1.6 M-line and top-of-the-range H-line models have 1.6 litre versions of the same engine, with an output of 110 hp (82 kW) at 6000 rpm and 148 N m of torque at 4000 rpm. Both the M-line and H-line models have active system antennae which actively search for signals in areas with poor reception.



With a 0-62mph time of 11.5 seconds and a top speed of 200kph, the 1.6-engined test car is not fast but it is quick. Besides, with traffic conditions and legal limitations in Malaysia, the performance figures are more than adequate.

The Proton Satria Neo comes with just two engine choices; 1.3- and 1.6-litre, petrol units. Only the latter is available with a 4-speed automatic transmission but there is a penalty to making that choice – poorer fuel consumption about 10-14km/l, a slower sprint time and greater CO2 emissions than with the 5-speed manual box.

If emissions and frugality are important to you, it is better to go for the 1.6 manual. Official figures are posted as; 27.9mpg (urban), 61.4mpg (extra-urban) and 42.8mpg for the combined

cycle. In this format, the Satria Neo exhausts 157g/km CO2, which puts it in VED Band D and the insurance is Group 7.

The 1.6 engine produces 112PS (111bhp) at 6,000rpm and 148Nm (109 lb ft) at 4,000rpm The same collaborative engines and transmission can also be found in the GEN-2 but for the Satria, they have been tweaked for better low to medium acceleration and flexibility.

Criticisms of the car include the lack of headroom and legroom for rear passengers (even compared to the previous generation Satria), and lacklustre performance in comparison with the Satria GTi. The infamous torque dip of Proton’s Campro engine is also present

Proton Satria Neo 1.6 (A) specifications











Model 1.6 Engine
Transmission MT AT
Valve Mechanism DOHC 16V
Displacement 1597cc
Bore & Stroke 76.0 X 88.0 (mm)
Fuel System MPI
No. of Cylinders 4
Max. Power 82kW (110hp) @ 6000rpm
Max. Torque 148Nm @ 4000rpm

Performance
Max. Speed 190km/h 185km/h
Acceleration
(0 – 100km/h) 11.5 (sec) 13.7 (sec)
Fuel Consumption
(@ 90km/h) 6.1L/100km 6.9L/100km

Dimensions
Overall Length 3905mm
Overall Width 1710mm
Overall Height 1420mm
Wheelbase 2440mm
Front Track 1470mm
Rear Track 1470mm
Front Overhang 825mm
Rear Overhang 640mm
Kerb Weight 1159kg 1184kg
Fuel Tank Capacity 50L

Chassis
Power Steering System Hydraulic Power Steering
Brake Service Front Ventilated Disc
Rear Solid Disc
Suspension Front MacPherson Strut with Stabiliser Bar
Rear Multilink with Stabiliser Bar
Tyre Size 195/50 R16″
Wheel Size 16″ X 7.0JJ

Power
- A formidable CamPro 16v DOHC engine
- Able to reach a maximum speed in excess of 190km/h*
- 0-100km/h injust 11.5secs*

Performance
- Handling by Lotus
- Precise steering response
- MacPherson strut system
- 16″ tyres for 1.6, 15″ for 1.3
- Braking system with ABS and EBD*

Interior
- Integrated radio control system on steering wheel*
- Stylish A/C knob system
- Sporty Tempest Grey interior
- Easy folding rear passenger seats
- Bold and Engagiing textures
- Bucket seats

Safety
- High structural integrity
- Double impact bars for greater side impact protection
- Immobilizer system*
- CAPTOR vehicle tracking system*
- Integrated SRS dual airbag*
- Integrated reverse sensors*


Khamis, 15 April 2010

Wastegate

A wastegate is a valve that diverts exhaust gases away from the turbine wheel in a turbocharged engine system. Diversion of exhaust gases regulates the turbine speed, which in turn regulates the rotating speed of the compressor. The primary function of the wastegate is to regulate the maximum boost pressure in turbocharger systems, to protect the engine and the turbocharger. One advantage of installing a remote mount wastegate to a free-float (or non-WG) turbo includes allowance for a smaller A/R turbine housing, resulting in less lag time before the turbo begins to spool and create boost.


How a Turbo Wastegate Works.

  1. A wastegate is an integral part of a turbocharger that ensures the motor doesn't get too much boost pressure as the turbo spools and rpms build. The wastegate is exactly what the name implies--a gate (or flap) that opens to divert waste (excess pressure from the turbo) into the exhaust or the atmosphere rather than into the turbo. In this way, the wastegate serves to regulate and protect the engine and turbocharger from excess boost. When boost pressure reaches a certain point--say, 10 psi or less for a normal-production turbocharged car--the flap of the wastegate opens and diverts pressure away from the turbine wheel.
  2. Internal Wastegate

  3. There are two types of wastegate, most common of which is the internal wastegate. This is usually found on cars with low boost settings like 5 psi or 6 psi, or even up to 10 psi. An internal wastegate is found inside the turbo housing and is a crucial component of the turbo itself. The diaphragm is connected to a hose that goes to the turbocharger compressor outlet, charge pipes or intake manifold. The gate is opened when the diaphragm on the wastegate is actuated. When boost pressure exceeds a predetermined amount, the diaphragm opens the spring-loaded wastegate bypass flap, allowing some of the pressure to go around the turbo's impeller, slowing it down. The excess pressure is then evacuated to the exhaust.
  4. External Wastegate

  5. The other type of wastegate is an external wastegate. As its name implies, the external type is separate from the turbo housing. It doesn't requires an actuator to function. This type of wastegate is actuated by a valve similar to a valve used in a cylinder head. Excess exhaust is either diverted from the turbo to the exhaust or evacuated into the atmosphere. The latter is referred to as a divorced wastegate, and is much louder than one that diverts to the exhaust. Most aftermarket turbo kits utilize an external wastegate; this type works well for setups that are generating 20 psi to 30 psi. An external wastegate must be installed with a special manifold that has an extra runner that works only with the wastegate. Because there are no space restraints, external wastegates can be much larger and can regulate boost levels more precisely.